DHWLOOP
DHWLOOP constructs one or more objects representing a domestic hot water circulation loop. The actual pipe runs in the DHWLOOP are specified by any number of DHWLOOPSEGs (see below). Circulation pumps are specified by DHWLOOPPUMPs (also below).
wlName
Optional name of loop; give after the word “DHWLOOP” if desired.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| 63 characters | none | No | constant |
wlMult
Type: integer
Number of identical loops of this type. Any value \(>1\) is equivalent to repeated entry of the same DHWLOOP (and all child objects).
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| x \(>\) 0 | 1 | No | constant |
wlFlow
Type: float
Loop flow rate (when operating).
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| gpm | x \(\ge\) 0 | 6 | No | hourly |
wlTIn1
Type: float
Inlet temperature of first DHWLOOPSEG.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| oF | x \(>\) 0 | DHWSYS wsTUse | No | hourly |
wlRunF
Type: float
Fraction of hour that loop circulation operates.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| x \(\ge\) 0 | 1 | No | hourly |
wlFUA
Type: float
DHWLOOPSEG pipe heat loss adjustment factor. DHWLOOPSEG UA is derived (from wgSize, wgLength, wgInsulK, wgInsulThk, and wgExH) and multiplied by wlFUA. Note: does not apply to child DHWLOOPBRANCHs (see wbFUA).
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| x \(>\) 0 | 1 | No | constant |
wlLossMakeupPwr
Type: float
Specifies electrical power available to make up losses from DHWLOOPSEGs (loss from DHWLOOPBRANCHs is not included). Separate loss makeup is typically used in multi-unit HPWH systems to avoid inefficiencies associated with high condenser temperatures. Loss-makeup energy is calculated hourly and is the smaller of loop losses and wlLossMakeupPwr. The resulting electricity use (including the effect of wlLossMakeupEff) is accumulated to the METER specified by wlElecMtr (end use dhwMFL). No other effect, such as heat gain to surroundings, is modeled.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| W | x \(\ge\) 0 | 0 | No | hourly |
wlLossMakeupEff
Type: float
Specifies the efficiency of loss makeup heating if any. No effect when wlLossMakeupPwr is 0.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| x \(>\) 0 | 1 | No | hourly |
wlElecMtr
Type: mtrName
Name of METER object, if any, to which DHWLOOP electrical energy use is recorded (under end use dhwMFL).
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| name of a METER | Parent DHWSYS wsElecMtr | No | constant |
endDHWLoop
Optionally indicates the end of the DHWLOOP definition.
| Units | Legal Range | Default | Required | Variability |
|---|---|---|---|---|
| none | No |
Related Probes: