## 6.23 DHWSYSRES

@DHWSYSRES[1..].

Name | Input? | Runtime? | Type | Variability | Description |
---|---|---|---|---|---|

name | – | X | string | constant | – |

Y.qOutDHW | – | X | number | end of run (of each phase, autoSize or simulate) | Hot water energy delivered to fixtures, btu (>=0, + = from dhwsys) |

Y.qOutHtg | – | X | number | end of run (of each phase, autoSize or simulate) | Space heating (chdhw) energy delivered, btu (>=0, + = from dhwsys) |

Y.qLossMisc | – | X | number | end of run (of each phase, autoSize or simulate) | Misc non-loop losses, btu (dhwtank losses, t24dhw branch losses, <= 0) |

Y.qLossLoop | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwloop/dhwloopbranch losses, btu (+ = to dhwsys, typically <= 0) |

Y.qDWHR | – | X | number | end of run (of each phase, autoSize or simulate) | Heat added via drain water heat recovery (dwhr), btu (+ = to dhwsys, >= 0) |

Y.qSSF | – | X | number | end of run (of each phase, autoSize or simulate) | Implied energy contribution from ws_ssf, btu (+ = to dhwsys, >= 0) |

Y.qSolar | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwsolarsys contribution, btu (+ = to dhwsys, >= 0) |

Y.qPrimary[0] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

Y.qPrimary[1] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

Y.qAux[0] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

Y.qAux[1] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

Y.qLoss[0] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

Y.qLoss[1] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

Y.qStorage[0] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

Y.qStorage[1] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

Y.qError[0] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

Y.qError[1] | – | X | number | end of run (of each phase, autoSize or simulate) | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

Y.qXBUDHW | – | X | number | end of run (of each phase, autoSize or simulate) | Extra backup heating allocated to dhw, btu (+ = to dhwsys, >= 0) |

Y.qXBUHtg | – | X | number | end of run (of each phase, autoSize or simulate) | Extra backup heating allocated to space heating, btu (+ = to dhwsys, >= 0) |

Y.qBal | – | X | number | end of run (of each phase, autoSize or simulate) | Sum of energy flows, btu = (qoutdhw + qouthtg) - sum( everything else) |

M.qOutDHW | – | X | number | end of each month | Hot water energy delivered to fixtures, btu (>=0, + = from dhwsys) |

M.qOutHtg | – | X | number | end of each month | Space heating (chdhw) energy delivered, btu (>=0, + = from dhwsys) |

M.qLossMisc | – | X | number | end of each month | Misc non-loop losses, btu (dhwtank losses, t24dhw branch losses, <= 0) |

M.qLossLoop | – | X | number | end of each month | Dhwloop/dhwloopbranch losses, btu (+ = to dhwsys, typically <= 0) |

M.qDWHR | – | X | number | end of each month | Heat added via drain water heat recovery (dwhr), btu (+ = to dhwsys, >= 0) |

M.qSSF | – | X | number | end of each month | Implied energy contribution from ws_ssf, btu (+ = to dhwsys, >= 0) |

M.qSolar | – | X | number | end of each month | Dhwsolarsys contribution, btu (+ = to dhwsys, >= 0) |

M.qPrimary[0] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

M.qPrimary[1] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

M.qAux[0] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

M.qAux[1] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

M.qLoss[0] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

M.qLoss[1] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

M.qStorage[0] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

M.qStorage[1] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

M.qError[0] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

M.qError[1] | – | X | number | end of each month | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

M.qXBUDHW | – | X | number | end of each month | Extra backup heating allocated to dhw, btu (+ = to dhwsys, >= 0) |

M.qXBUHtg | – | X | number | end of each month | Extra backup heating allocated to space heating, btu (+ = to dhwsys, >= 0) |

M.qBal | – | X | number | end of each month | Sum of energy flows, btu = (qoutdhw + qouthtg) - sum( everything else) |

D.qOutDHW | – | X | number | end of each day | Hot water energy delivered to fixtures, btu (>=0, + = from dhwsys) |

D.qOutHtg | – | X | number | end of each day | Space heating (chdhw) energy delivered, btu (>=0, + = from dhwsys) |

D.qLossMisc | – | X | number | end of each day | Misc non-loop losses, btu (dhwtank losses, t24dhw branch losses, <= 0) |

D.qLossLoop | – | X | number | end of each day | Dhwloop/dhwloopbranch losses, btu (+ = to dhwsys, typically <= 0) |

D.qDWHR | – | X | number | end of each day | Heat added via drain water heat recovery (dwhr), btu (+ = to dhwsys, >= 0) |

D.qSSF | – | X | number | end of each day | Implied energy contribution from ws_ssf, btu (+ = to dhwsys, >= 0) |

D.qSolar | – | X | number | end of each day | Dhwsolarsys contribution, btu (+ = to dhwsys, >= 0) |

D.qPrimary[0] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

D.qPrimary[1] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

D.qAux[0] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

D.qAux[1] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

D.qLoss[0] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

D.qLoss[1] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

D.qStorage[0] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

D.qStorage[1] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

D.qError[0] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

D.qError[1] | – | X | number | end of each day | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

D.qXBUDHW | – | X | number | end of each day | Extra backup heating allocated to dhw, btu (+ = to dhwsys, >= 0) |

D.qXBUHtg | – | X | number | end of each day | Extra backup heating allocated to space heating, btu (+ = to dhwsys, >= 0) |

D.qBal | – | X | number | end of each day | Sum of energy flows, btu = (qoutdhw + qouthtg) - sum( everything else) |

H.qOutDHW | – | X | number | end of each hour | Hot water energy delivered to fixtures, btu (>=0, + = from dhwsys) |

H.qOutHtg | – | X | number | end of each hour | Space heating (chdhw) energy delivered, btu (>=0, + = from dhwsys) |

H.qLossMisc | – | X | number | end of each hour | Misc non-loop losses, btu (dhwtank losses, t24dhw branch losses, <= 0) |

H.qLossLoop | – | X | number | end of each hour | Dhwloop/dhwloopbranch losses, btu (+ = to dhwsys, typically <= 0) |

H.qDWHR | – | X | number | end of each hour | Heat added via drain water heat recovery (dwhr), btu (+ = to dhwsys, >= 0) |

H.qSSF | – | X | number | end of each hour | Implied energy contribution from ws_ssf, btu (+ = to dhwsys, >= 0) |

H.qSolar | – | X | number | end of each hour | Dhwsolarsys contribution, btu (+ = to dhwsys, >= 0) |

H.qPrimary[0] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

H.qPrimary[1] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

H.qAux[0] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

H.qAux[1] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

H.qLoss[0] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

H.qLoss[1] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

H.qStorage[0] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

H.qStorage[1] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

H.qError[0] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

H.qError[1] | – | X | number | end of each hour | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

H.qXBUDHW | – | X | number | end of each hour | Extra backup heating allocated to dhw, btu (+ = to dhwsys, >= 0) |

H.qXBUHtg | – | X | number | end of each hour | Extra backup heating allocated to space heating, btu (+ = to dhwsys, >= 0) |

H.qBal | – | X | number | end of each hour | Sum of energy flows, btu = (qoutdhw + qouthtg) - sum( everything else) |

S.qOutDHW | – | X | number | end of each subhour | Hot water energy delivered to fixtures, btu (>=0, + = from dhwsys) |

S.qOutHtg | – | X | number | end of each subhour | Space heating (chdhw) energy delivered, btu (>=0, + = from dhwsys) |

S.qLossMisc | – | X | number | end of each subhour | Misc non-loop losses, btu (dhwtank losses, t24dhw branch losses, <= 0) |

S.qLossLoop | – | X | number | end of each subhour | Dhwloop/dhwloopbranch losses, btu (+ = to dhwsys, typically <= 0) |

S.qDWHR | – | X | number | end of each subhour | Heat added via drain water heat recovery (dwhr), btu (+ = to dhwsys, >= 0) |

S.qSSF | – | X | number | end of each subhour | Implied energy contribution from ws_ssf, btu (+ = to dhwsys, >= 0) |

S.qSolar | – | X | number | end of each subhour | Dhwsolarsys contribution, btu (+ = to dhwsys, >= 0) |

S.qPrimary[0] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

S.qPrimary[1] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] primary heat added, btu |

S.qAux[0] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

S.qAux[1] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] in-tank aux heat added, btu |

S.qLoss[0] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

S.qLoss[1] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] tank loss, btu |

S.qStorage[0] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

S.qStorage[1] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] change in tank heat content, btu |

S.qError[0] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

S.qError[1] | – | X | number | end of each subhour | Dhwheater [0] or dhwloopheater [1] hpwh internal heat balance error, btu |

S.qXBUDHW | – | X | number | end of each subhour | Extra backup heating allocated to dhw, btu (+ = to dhwsys, >= 0) |

S.qXBUHtg | – | X | number | end of each subhour | Extra backup heating allocated to space heating, btu (+ = to dhwsys, >= 0) |

S.qBal | – | X | number | end of each subhour | Sum of energy flows, btu = (qoutdhw + qouthtg) - sum( everything else) |